93 clubcar carryall diffrent clutch

[clubcar93]

i was wondering whats the difference between a 93 drive clutch and a 04 drive clutch

[lockman1]

The rotation!

93 is counter-clockwise
04 is clockwise

[clubcar93]

Originally Posted by lockman1

The rotation!

93 is counter-clockwise
04 is clockwise

The clutch that is closser to the transmission

[lockman1]

Originally Posted by clubcar93

The clutch that is closser to the transmission

In that case, it would be the "Driven" clutch!
and it's to my understanding, there still is a difference of rotation even for driven clutches!

[clubcar93]

Right now it works fine. So I guess I don't have to worry about it. Because if it was really different it might not drive at all?? Thanks for all the replies.

[ckiguy]

soo does this mean it will work? i bet if he puts it in reverse it will work! ha! ha! ha!
after all i heard on the internet thingy the other day thtas allyyou had to do!

[clubcar93]

I ment the rear clutch where the transmission is. My golfcart is a 93 and I changed the driving clutch from 04 when I went up hill the belt was slipping off so I was woundering why it was doing that but know I got it fixed it was just the belt it was greasy

[4vertical]

lockman is correct, as usual. it is the rotation. the springs are wound different when stock. on is clockwise, while the other is counterclockwise. they also look different while preloaded as they turn different directions. Now if you have a torque spring in there, or the little tabs have broken off the spring, they will work just fine either direction.

[clubcar93]

Originally Posted by 4vertical

lockman is correct, as usual. it is the rotation. the springs are wound different when stock. on is clockwise, while the other is counterclockwise. they also look different while preloaded as they turn different directions. Now if you have a torque spring in there, or the little tabs have broken off the spring, they will work just fine either direction.

Thats weird because it drives fine like before with the old one. If anything i can get a new torque spring and probable take it apart and flip the little tabs to go on the other side. The belt slipped one time when i was going up a hill.. but thats because i sprayed some grease on the drive clutch accidentally. Probably need a new belt too since it hasnt been replaced since who knows when.