|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-22-2015, 03:43 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2011
Location: Texas
Posts: 9
|
crank seals - won't start
Will not start, but turns over.
How could i test the crank seals? I have a 1983 gas ezgo with new carb, new fuel pump (not squirting well), new spark plug, and new 540 cca 12v battery. I also have the old stock coil and plug wire. Muffler is detached. Fuel is Tru-fuel mixed at 128:1 gravity fed to fuel pump. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-22-2015, 06:37 PM
|
#2 |
|
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,495
|
Re: crank seals - won't start
A new fuel pump not squirting good, pretty much says bad crank seals.
|
|
|
|
|
09-12-2015, 10:08 AM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2011
Location: Texas
Posts: 9
|
Re: crank seals - won't start
Update: I pulled the engine and replaced the seals. While removing the clutch, I messed up the clutch threaded hole and can't get the bolt back in. I tried tapping the hole but couldn't get it right. So it looks like I'm going to have to take it to a machine shop and get them to tap it again and get a larger bolt.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Need help with crank seals g1 | Gas Yamaha | |||
| G1 crank seals | Gas Yamaha | |||
| I think it needs crank seals | Gas Columbia ParCar | |||
| Help with G1 Crank Seals | Gas Yamaha | |||
| g1 crank seals | Gas Yamaha | |||
Linear Mode
