10-16-2015, 11:50 PM | #1 |
Not Yet Wild
Join Date: May 2015
Posts: 35
|
New ct engine
I got a 375 from ct rebuilds and it runs great as long as I leave the choke on. I had a 350 in before so carb should not be a problem. Any ideas on how to fix. It ran before without choking
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-17-2015, 06:37 AM | #2 |
Not Yet Wild
Join Date: Aug 2014
Posts: 16
|
Re: New ct engine
Make sure you got a good seal on the carb/manifold.....might be sucking air in there.I'm thinking of swapping my engine with one of those vs rebuilding it myself...Whats the latest price on them? Let us know how it turns out...Thanks
|
10-17-2015, 01:18 PM | #3 |
Not Yet Wild
Join Date: May 2015
Posts: 35
|
Re: New ct engine
Thanks was sucking air. Any ideas why clutch is clacking?
|
10-20-2015, 01:57 PM | #4 |
Not Yet Wild
Join Date: May 2015
Posts: 35
|
Re: New ct engine
How fast shold this cart go? It does not seem as fast as original 350. Also when putting drive clutch back together should i twist it any to put more pressure on spring?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1984 ezgo marathon engine replacement to atv engine | Gas EZGO | |||
G2 Engine, G1 Engine and lots of G1 cart parts. | Golf Carts and Parts | |||
Engine and Wireing Diagram Robin Engine Model # EC253PG | Gas EZGO | |||
Club Car engine install/clone engine help | Gas Club Car | |||
Amsoil Synthetic engine oil or Royal Purple engine oil | Big Block Talk! |