|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-14-2015, 05:45 PM | #1 |
Not Yet Wild
Join Date: Jun 2013
Posts: 15
|
Rebuilding 350cc 2001 EzGo, need help with piston ring install
i have a set of piston rings I had lying around from 2006 and I have a 99'
Rebuild manual What I need help on is identifying which piston ring is compression and the wiper One ring is completely grey and the other one have a silver machines edge on the outside The completely grey one is perfectly square no beveled edge but the grey/machines edge one has a bevel to it on the inside Also they have a small dot/ circle so really don't know top from bottom |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-14-2015, 08:37 PM | #2 |
Gone Wild
Join Date: Apr 2011
Location: Washington State
Posts: 385
|
Re: Rebuilding 350cc 2001 EzGo, need help with piston ring install
The chrome(silver) plated ring is your top compression ring and should be beveled on the inside . The other ring is the scraper,
Both rings should be installed with the dot or circle up. Be sure and space the ring gaps at least 120 deg apart and not on the thrust faces of the piston. |
12-15-2015, 01:21 PM | #3 |
Not Yet Wild
Join Date: Jun 2013
Posts: 15
|
Re: Rebuilding 350cc 2001 EzGo, need help with piston ring install
Appreciate the response! I had them flipped
|
12-20-2015, 02:54 PM | #4 |
Not Yet Wild
Join Date: Jun 2013
Posts: 15
|
Re: Rebuilding 350cc 2001 EzGo, need help with piston ring install
I have the three piece oil rings....do I line them up or space them with no gap??
|
12-20-2015, 05:13 PM | #5 |
Gone Wild
Join Date: Apr 2011
Location: Washington State
Posts: 385
|
Re: Rebuilding 350cc 2001 EzGo, need help with piston ring install
space oil ring gaps one inch apart,nothing lined up.
|
12-20-2015, 07:36 PM | #6 |
Not Yet Wild
Join Date: Jun 2013
Posts: 15
|
Re: Rebuilding 350cc 2001 EzGo, need help with piston ring install
Thanks
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Rebuilding 350cc for performance. Need advice. | Gas EZGO | |||
need help..old style piston ring install | Gas EZGO | |||
Rebuilding a 350cc | Gas EZGO | |||
ezgo 350cc .25mm oversized piston kits | Golf Carts and Parts | |||
Ezgo, Gas Golf cart. Rebuilding piston help! (1st Post) | Electric Club Car |