13hp clone

PV5 · 05-16-2008, 01:59 AM

Hey Man,
My motor is working out fine. I had to put a stronger "return" spring on the throttle arm to help lower the idle but now its fine. It seemed like if you just eased around it would load up to a high idle...once you ran at full throttle for a second it would idle right.
Hope you get your belt worked out and get that thing ready to ride.

Bryan

Shmitty · 05-16-2008, 08:00 AM

Picked up the belt yesterday. Hopefully going to be able to work on it this weekend.

Thanks for the advice on the idle spring Bryan. I'm sure once I get this thing all together, I'm going to need to tinker

scottyb · 05-17-2008, 10:44 PM

Shmitty, i'm wondering how this is working out? Was the engine rotation the same as original?

Shmitty · 05-18-2008, 10:55 AM

Scotty,

It's a 1995 so I'm hoping it turns the right way.

I'm hoping to be done with it this week. I'll keep everyone posted once it's running!

scottyb · 05-18-2008, 03:06 PM

I think 96 was the change year. Someone correct me if I'm wrong. Did you get the belt on. Hurry up!

LOL

Shmitty · 05-19-2008, 08:39 AM

Scottyb I'm ten times worse than you right now!

I'm hoping to get it done this week. I think I keep saying that week after week.

scottyb · 05-19-2008, 06:15 PM

[quote=Shmitty;68633] Scottyb I'm ten times worse than you right now! QUOTE]

I'm not sure that is possible.....
I'm talking with a company that says it can put a flywheel side shaft on a honda twin...I'll let ya'll know if this works out.

Shmitty · 05-19-2008, 06:34 PM

Okay I take that statement back!

Make sure we get pictures of that!

scottyb · 05-19-2008, 07:44 PM

I found the shaft. it is a bolt on item $175. Nice round number.

Yamaha4life · 05-31-2008, 08:56 PM

Hey I was just wondering how you ended up with the gas tank issue. Did running a fuel pump and the stock tank work?

Thanks

05-16-2008, 01:59 AM	#61
PV5 Gone Wild Join Date: Aug 2007 Location: Jerusalem AR Posts: 214	Re: 13hp clone Hey Man, My motor is working out fine. I had to put a stronger "return" spring on the throttle arm to help lower the idle but now its fine. It seemed like if you just eased around it would load up to a high idle...once you ran at full throttle for a second it would idle right. Hope you get your belt worked out and get that thing ready to ride. Bryan

05-16-2008, 08:00 AM	#62
Shmitty Not Yet Wild Join Date: Mar 2008 Posts: 34	Re: 13hp clone Picked up the belt yesterday. Hopefully going to be able to work on it this weekend. Thanks for the advice on the idle spring Bryan. I'm sure once I get this thing all together, I'm going to need to tinker
Shmitty Not Yet Wild Join Date: Mar 2008 Posts: 34

05-17-2008, 10:44 PM	#63
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: 13hp clone Shmitty, i'm wondering how this is working out? Was the engine rotation the same as original?

05-18-2008, 10:55 AM	#64
Shmitty Not Yet Wild Join Date: Mar 2008 Posts: 34	Re: 13hp clone Scotty, It's a 1995 so I'm hoping it turns the right way. I'm hoping to be done with it this week. I'll keep everyone posted once it's running!
Shmitty Not Yet Wild Join Date: Mar 2008 Posts: 34

05-18-2008, 03:06 PM	#65
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: 13hp clone I think 96 was the change year. Someone correct me if I'm wrong. Did you get the belt on. Hurry up! LOL

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

05-19-2008, 08:39 AM	#66
Shmitty Not Yet Wild Join Date: Mar 2008 Posts: 34	Re: 13hp clone Scottyb I'm ten times worse than you right now! I'm hoping to get it done this week. I think I keep saying that week after week.
Shmitty Not Yet Wild Join Date: Mar 2008 Posts: 34

05-19-2008, 06:15 PM	#67
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: 13hp clone [quote=Shmitty;68633] Scottyb I'm ten times worse than you right now! QUOTE] I'm not sure that is possible..... I'm talking with a company that says it can put a flywheel side shaft on a honda twin...I'll let ya'll know if this works out.

05-19-2008, 06:34 PM	#68
Shmitty Not Yet Wild Join Date: Mar 2008 Posts: 34	Re: 13hp clone Okay I take that statement back! Make sure we get pictures of that!
Shmitty Not Yet Wild Join Date: Mar 2008 Posts: 34

05-19-2008, 07:44 PM	#69
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: 13hp clone I found the shaft. it is a bolt on item $175. Nice round number.

05-31-2008, 08:56 PM	#70
Yamaha4life The Overposter! Join Date: Nov 2007 Location: Dixie Posts: 1,586	Re: 13hp clone Hey I was just wondering how you ended up with the gas tank issue. Did running a fuel pump and the stock tank work? Thanks

Similar Threads
Thread	Forum
13HP came in one piece	Big Block Talk!
Having some fun with 13hp	Videos
13hp Club Car Swap	Big Block Talk!
My 13hp engine update	Big Block Talk!