13hp clone

4x4 CC · 06-01-2008, 08:09 PM

Scotty. Bad decesion on the flywheel shaft. I thought about this when I had my 98 rear end. Well it turns out the bearings on the flywheel side arent big enough and arent made to carry the load a TIGHTENING clutch will put on it. I know, bummed me out too...

cclingma · 06-17-2008, 07:24 PM

Quote:

Hey I was just wondering how you ended up with the gas tank issue. Did running a fuel pump and the stock tank work?

Thanks

I'm very curious about that as well. Also, how has the stock exhaust and air filter setup worked?

Thanks for blazing the trail of cloneing!

jwfab1 · 04-28-2009, 07:28 PM

Old thread, just wondering how everything worked out?

GA.NUT · 04-30-2009, 09:37 AM

My clone is still running strong after 16 months. but am on my 3rd ignition coil. first one i may have burnt..going to get 15hp kohler ready for when it does bite the dust..

kevinandrew · 03-05-2010, 03:00 PM

the clone motors look pretty much honda gx 350's . i have the same old problem. blown up fe290. don't want to spend the $ to get one from club car. how do those of you who have put clones in your carts like them. i'm condsidering ordering a 16hp with electric start from carrol stream. comments?

hookm · 03-05-2010, 04:32 PM

I have a CS 16hp ,over 100 hrs no problems. hookm

BLACK DEATH · 03-05-2010, 04:33 PM

How much is that motor? Im thinking of the doing the same thing

hookm · 03-05-2010, 04:47 PM

I think around $400,you have to get a cluch though. hookm

BLACK DEATH · 03-05-2010, 04:56 PM

New clutch no problem, now wich clutch to get for the engine? What about the rear driven clutch?

hookm · 03-05-2010, 05:02 PM

I used a 780,they're extinct, on front ,I don't know what the rear is, I got from Tom , CPP. I redid my rear suspension this winter,3 point with coil over shocks,can't believe the difference in the ride.

06-01-2008, 08:09 PM	#71
4x4 CC Frog Hunter Join Date: Dec 2006 Location: Little Rock, Ar Posts: 1,161	Re: 13hp clone Scotty. Bad decesion on the flywheel shaft. I thought about this when I had my 98 rear end. Well it turns out the bearings on the flywheel side arent big enough and arent made to carry the load a TIGHTENING clutch will put on it. I know, bummed me out too...

04-28-2009, 07:28 PM	#73
jwfab1 Not Yet Wild Join Date: Apr 2008 Posts: 13	Re: 13hp clone Old thread, just wondering how everything worked out?
jwfab1 Not Yet Wild Join Date: Apr 2008 Posts: 13

04-30-2009, 09:37 AM	#74
GA.NUT Not Yet Wild Join Date: Mar 2008 Location: S. GA Posts: 65	Re: 13hp clone My clone is still running strong after 16 months. but am on my 3rd ignition coil. first one i may have burnt..going to get 15hp kohler ready for when it does bite the dust..

03-05-2010, 03:00 PM	#75
kevinandrew Gone Wild Join Date: Mar 2010 Location: wolflake, indidana Posts: 467	Re: 13hp clone the clone motors look pretty much honda gx 350's . i have the same old problem. blown up fe290. don't want to spend the $ to get one from club car. how do those of you who have put clones in your carts like them. i'm condsidering ordering a 16hp with electric start from carrol stream. comments?

03-05-2010, 04:32 PM	#76
hookm Younger Than Dirt Join Date: Aug 2007 Location: North Myrtle Beach SC Posts: 2,047	Re: 13hp clone I have a CS 16hp ,over 100 hrs no problems. hookm

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-05-2010, 04:33 PM	#77
BLACK DEATH Gone Wild Join Date: Dec 2009 Location: Corpus Christi, TX Posts: 1,644	Re: 13hp clone How much is that motor? Im thinking of the doing the same thing

03-05-2010, 04:47 PM	#78
hookm Younger Than Dirt Join Date: Aug 2007 Location: North Myrtle Beach SC Posts: 2,047	Re: 13hp clone I think around $400,you have to get a cluch though. hookm

03-05-2010, 04:56 PM	#79
BLACK DEATH Gone Wild Join Date: Dec 2009 Location: Corpus Christi, TX Posts: 1,644	Re: 13hp clone New clutch no problem, now wich clutch to get for the engine? What about the rear driven clutch?

03-05-2010, 05:02 PM	#80
hookm Younger Than Dirt Join Date: Aug 2007 Location: North Myrtle Beach SC Posts: 2,047	Re: 13hp clone I used a 780,they're extinct, on front ,I don't know what the rear is, I got from Tom , CPP. I redid my rear suspension this winter,3 point with coil over shocks,can't believe the difference in the ride.

Similar Threads
Thread	Forum
13HP came in one piece	Big Block Talk!
Having some fun with 13hp	Videos
13hp Club Car Swap	Big Block Talk!
My 13hp engine update	Big Block Talk!