Solenoid Problem ???

[shadowman]

there is one in the V-glide check to see if its activating when you press pedal..................or if you have any just try swapping it out................................

[ninershawn2418]

Originally Posted by Stevegrmich

V-glide is just a "wiper" arm with a "brush" that glides over wide "contact" points . . .

any one have any thoughts on what the problem might be ?

[Stevegrmich]

Originally Posted by ninershawn2418

any one have any thoughts on what the problem might be ?

Have you inspected your V Glide yet?

[ninershawn2418]

Originally Posted by ninershawn2418

any one have any thoughts on what the problem might be ?

just found out the solenoid i replaced is a 36 volt not 48 could that be the problem

[shadowman]

yes that could be your problem............................

[ninershawn2418]

after changing the solenoid i got 51 volts to the 2 big posts but no clicking so i put on the resister but then lost volts but started clicking i now have no volts to the 2 small posts when depressing accelerator help please

[shadowman]

so now yoursoleniod is clicking but you have no voltage going to it?? that dosn,t make sense.........i,m thinking........................

[ninershawn2418]

the soleniod has always clicked but had no volts to the 2 big posts after switching solenoid i had 51 volts to the 2 large posts but it did not click so i hooked up resister and now it clicks but only got .6 volts nothing to 2 small posts with accelerator depressed

[shadowman]

you should have voltage at small post thats what isn,t making any sense....................................

[ninershawn2418]

what would make it not have volts there