Tachometer help please!!

[rideonone]

I'm not sure what year my cart is when I bought it the serial numbers had been ryno lined over I need help hooking up a tachometer I have no clue were to hook the green signal wire to make it work. Please help.

[IMNFL]

Originally Posted by rideonone

I'm not sure what year my cart is when I bought it the serial numbers had been ryno lined over I need help hooking up a tachometer I have no clue were to hook the green signal wire to make it work. Please help.

If this Club Car was made in 95 or 96 it will have three stickers on it with the SN.
I assume you are referring to the one on the floor board was Ryno Lined over?
Look under the dashboard and see if there ain't a serial # there?
If it’s gone then pull the center panel out (4 Phillips Screws) of the dash and there should be one there.
If it's gone call the police and turn it in!

Seriously
It should have two or one left. Out of three.

As for that green wire Try grounding it. (That is if you got one on the spark plug?)

RYNO LINER, "Never had that problem b 4"

I'm getting to be a real techy! Ain't I A1?
SN and Tach. "I've had that problem b 4 on my '96."

[lockman1]

I personally don't know where the green wire goes...

But, as for your serial number...
It's VERY important to know your serial number (or, the year of your cart... exactly) when getting parts!

To help flipper out a little,
Heres a pic of where my second serial number is, (my cart is fairly new)
If yours is older, it may be on the frame rail under that same dash panel!

[IMNFL]

Originally Posted by lockman1

I personally don't know where the green wire goes...

But, as for your serial number...
It's VERY important to know your serial number (or, the year of your cart... exactly) when getting parts!

To help flipper out a little,
Heres a pic of where my second serial number is, (my cart is fairly new)
If yours is older, it may be on the frame rail under that same dash panel!

Lockman your right on!
See they are still behind that panel. Thanks for the support and picture.
Flip

[rideonone]

I have all the paper work some were for this thing I got it used and it's just been sitting at my hunting lease. I will pull that panel off this weekend and get the serial number it should be there but the guy I got it from took all the body work off and ryno lined everything but I'm sure I can cut it off as long as it's cover up by that panel. And the green wire should be hooked up to your signal I just don't know what wire is the signal from the coil. Thanks for all the help.