|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
02-01-2009, 04:30 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2009
Posts: 11
|
belt slipping
have been noticing that my g14 would stop pulling and you could smell and hear the belt slipping. well i installed a new belt with the same results. belt will start to slip. is there any adjustment to move the motor forward or something im overlooking?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-01-2009, 04:31 PM
|
#2 |
|
doin it in the desert
 Join Date: Dec 2008
Location: Sonora Desert,Az
Posts: 5,603
|
Re: belt slipping
maybe a worn clutch plate.
|
|
|
|
|
02-01-2009, 05:12 PM
|
#3 |
|
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: belt slipping
Check the rear clutch. A snap ring holds the spring seat away from rear end housing and they have been know to break. Check that and the spring itself. If that s the problem I would recommend getting a new sliding sleve and heavier spring to go back together.
|
|
|
|
|
02-01-2009, 05:25 PM
|
#4 |
|
Not Yet Wild
Join Date: Jan 2009
Posts: 11
|
Re: belt slipping
will check the stuff yall mentioned. but did notice when i took the old belt off it was reall easy to come off, i thought amybe it was scretched, but when i installed the new one it slid right one with no problem. like the motor is to far back.
|
|
|
|
|
02-01-2009, 05:32 PM
|
#5 |
|
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: belt slipping
Where is the belt seating on the rear sleve, top middle or bottom?
Pull up on the belt and see how easy the rear sleve slides in . |
|
|
|
|
02-01-2009, 07:44 PM
|
#6 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 17,603
|
Re: belt slipping
Maybe a broken tensioner or motor mounts.
|
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
02-01-2009, 08:31 PM
|
#7 |
|
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: belt slipping
ya my g9 does the same thing if the belt gets wet, but on the primary clutch
|
|
|
|
|
02-04-2009, 05:03 PM
|
#8 |
|
Not Yet Wild
Join Date: Jan 2009
Posts: 11
|
Re: belt slipping
checked motor mounts, clutch. both were fine. installed smaller yamaha belt. works perfect.
|
|
|
|
|
02-04-2009, 08:15 PM
|
#9 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 17,603
|
Re: belt slipping
Something had to change for it to all of a sudden need a shorter belt.
 Glad to hear it's working. |
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
02-05-2009, 08:10 AM
|
#10 |
|
Not Yet Wild
Join Date: Jan 2009
Posts: 11
|
Re: belt slipping
New Guy, The Tensioner You're Talking About. Is It On The Right Side Of The Motor. If So Ill Check Tonight.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 03 slipping problem | Gas EZGO | |||
| belt slipping when wet. | Gas Yamaha | |||
| Electric Cart Started felt like belt slipping | Electric Club Car | |||
| Yamaha belt slipping | Gas Yamaha | |||
| Steering Wheel Slipping | Electric Club Car | |||
Linear Mode
