![]() |
![]() |
#1 |
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,325
|
![]() Just a heads up that I have uploaded the Transmission Assembly guide to : https://evtechnicalservices.com/onli...embly-document
It's the document used when these were put together from component level in Wisconsin using the parts which were here since 2012. A common issue is the transmission will pop out of gear and not move. Sometimes the casing gets damaged and there isn't much you can do with that, but on some units built in WI they forgot to install the snap ring on the input shaft. This would finally end up with the gears no longer meshing and your Vanish sitting in the woods while the motor can run but the wheels do nothing. The document is still half in Chinese, but the photos should help anyone trying to get an idea of what's inside the thing. Good luck all! |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Not Yet Wild
Join Date: Jul 2017
Posts: 32
|
![]() My Vanish stopped working right in the middle of plowing snow last winter. I had it serviced by a local dealer that is a Tomberlin dealer. They pulled the transmission and said that there was a roll pin in the transmission on the main shaft that sheared off and had to be replaced. Do you know what roll pin they're talking about, and is this a common thing as well?
Thanks! Don |
![]() |
![]() |
![]() |
#3 |
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,325
|
![]() I am thinking it was one of the rollpins in the premade chinese components. I've also heard quite a few folks with the transmission instantly "popping" something when they accidentally shift from forward to reverse or the opposite while still in motion.
|
![]() |
![]() |
![]() |
#4 |
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,325
|
![]() I have also added to "Tech Tips" to the site related to transmission and CV Clicking noise...
Fluid Level: https://evtechnicalservices.com/onli...sh-fluid-level Shift Cable Adjustment: https://evtechnicalservices.com/onli...justment-17-01 CV Clicking Noise: https://evtechnicalservices.com/onli...axle-nut-17-03 |
![]() |
![]() |
![]() |
#5 |
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,325
|
![]() Also added a tech tip for the newer units (even though they were built about 2-3 years ago with even older parts).
Slips out of forward gear: https://evtechnicalservices.com/onli...-of-gear-22-01 |
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
Join Date: Jul 2017
Posts: 32
|
![]() Thanks so much for your continued support of the Tomberlin products John. Really appreciate it!!!
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Vanish transmission may have just broke | Tomberlin | |||
Vanish issues | Tomberlin | |||
Tomberlin Vanish | Tomberlin | |||
Vanish is surging | Tomberlin |