driven clutch

ssmokey24 · 09-13-2009, 05:18 PM

can a ezgo rear clutch fit a club car? the reason i ask is because the stock club car uses a 7/8 belt and i installed a vanny with a ezgo engine clutch with a 1 1/8 belt and now the belt is no where near going all the way down on the rear clutch or is my best bet sending it off to try and get it machined to work?

smoother · 09-27-2009, 09:35 PM

From what I have seen, the ezgo uses a splined shaft and the cc has a keyed shaft

tonyton · 09-27-2009, 09:55 PM

I agree.

the ez go clutch would have to be modified to fit the club car keyed shaft. (if possible) or put an EZGO rear end in your CC. A good machinist could bore a hole in the clutch and build an insert or maybe just cut the clutch to size with a key slot. You may get lucky and they both have same diameter. Cut out a spline and install a key to catch it from spinning on the shaft. That's a little sloppy sounding, but would probably work.

You get the idea. Make it work! Good Luck!
Let us know what happens

scottyb · 09-27-2009, 10:11 PM

Contact Tom at CPP. He is the man who will know what the best option is and if it can be machined he can do it

http://www.buggiesgonewild.com/site-sponsors.php

ssmokey24 · 09-28-2009, 04:29 AM

thanks for the replys i have contacted tom and the stock clutch can be machined to work!

scottyb · 09-28-2009, 08:42 AM

Quote:

Originally Posted by ssmokey24

thanks for the replys i have contacted tom and the stock clutch can be machined to work!

I knew Tom at CPP could steer you right

He did some excellent work on my Ezgo Driven clutch.

09-13-2009, 05:18 PM	#1
ssmokey24 Getting Wild Join Date: Jul 2009 Location: florida Posts: 91	driven clutch can a ezgo rear clutch fit a club car? the reason i ask is because the stock club car uses a 7/8 belt and i installed a vanny with a ezgo engine clutch with a 1 1/8 belt and now the belt is no where near going all the way down on the rear clutch or is my best bet sending it off to try and get it machined to work?

09-27-2009, 09:35 PM	#2
smoother Not Yet Wild Join Date: Mar 2009 Posts: 20	Re: driven clutch From what I have seen, the ezgo uses a splined shaft and the cc has a keyed shaft
smoother Not Yet Wild Join Date: Mar 2009 Posts: 20

09-27-2009, 09:55 PM	#3
tonyton Gone Wild Join Date: Jan 2009 Location: Alabama Posts: 2,120	Re: driven clutch I agree. the ez go clutch would have to be modified to fit the club car keyed shaft. (if possible) or put an EZGO rear end in your CC. A good machinist could bore a hole in the clutch and build an insert or maybe just cut the clutch to size with a key slot. You may get lucky and they both have same diameter. Cut out a spline and install a key to catch it from spinning on the shaft. That's a little sloppy sounding, but would probably work. You get the idea. Make it work! Good Luck! Let us know what happens

09-27-2009, 10:11 PM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 72,756	Re: driven clutch Contact Tom at CPP. He is the man who will know what the best option is and if it can be machined he can do it http://www.buggiesgonewild.com/site-sponsors.php

09-28-2009, 04:29 AM	#5
ssmokey24 Getting Wild Join Date: Jul 2009 Location: florida Posts: 91	Re: driven clutch thanks for the replys i have contacted tom and the stock clutch can be machined to work!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
driven clutch	Golf Carts and Parts
driven clutch	Gas EZGO
Driven Clutch	Golf Carts and Parts
wtb driven clutch for 91 ez go	Golf Carts and Parts
driven clutch	Gas EZGO