|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-21-2013, 11:51 AM
|
#1 |
|
Not Yet Wild
Join Date: May 2013
Posts: 1
|
Cushman Titan
New to forum. I have an older Cushman Titan which I am told is the same as an EZGO. No vin plate or serial #.
36V system, has rocker switch and solenoids for the FNR. Bought it non-running. New batteries, tested at 38+V. New Curtis 1204 controller. Solenoid energizes correctly, and POT tests good. 37+ volts to controller input lugs. Voltage coming from controller output lugs varies from -1V to +1.6V depending on POT position. Motor: one of the motor posts (s2) show continuity to frame, and the s1 and s2 posts show no continuity to each other. Any guidance would be appreciated. I am thinking the motor is bad (stator shorted) and the new controller is bad as well. Last edited by remonroe; 05-21-2013 at 01:21 PM.. Reason: more info |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
| Tags |
| controller, cushman, dead, titan |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Titan 589 M/T tires | Golf Carts and Parts | |||
| Need Cushman Titan Help | Electric golf carts | |||
| Cushman Titan (1997) | Electric golf carts | |||
| Parting out a Cushman Titan flatbed | Golf Carts and Parts | |||
Linear Mode
