|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-29-2012, 07:19 PM | #1 |
Not Yet Wild
Join Date: Feb 2012
Posts: 2
|
98 club car 48v reverse problem
I have 98 CC 48v series model ds. operates fine forward but wont go in reverse. Solenoid clicks but no movement. I replaced the f & r and the micro switches but no luck. Any ideas.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-29-2012, 09:06 PM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 98 club car 48v reverse problem
Reverse the white and black wires on the rear-most micro switch and see what it does. If you lose forward, but re-gain reverse you'll need to replace/bypass the half-speed resistor. It's located about 6" deep into the wire loom attached to those same black and white wires.
|
02-29-2012, 09:24 PM | #3 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 98 club car 48v reverse problem
Quote:
That's a sneaky place to put it! |
|
03-01-2012, 01:36 PM | #4 |
Not Yet Wild
Join Date: Feb 2012
Posts: 2
|
Re: 98 club car 48v reverse problem
Did so and I still only have forward and no reverse. Thanks for the info.
|
03-01-2012, 01:49 PM | #5 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 98 club car 48v reverse problem
Sounds like you need to replace your F&R switch. Take it off and inspect the contact, front and back. You'll have to remove it to see the front ones. One of them is likely burnt/melted.
|
05-19-2023, 08:12 AM | #6 |
Gone Wild
Join Date: Jul 2009
Location: Houston, TX
Posts: 237
|
Re: 98 club car 48v reverse problem
So I am having similar issues except that when I bypass the 1/2 speed resistor, the cart works in forward and reverse 100% of the time.
When I connect wires to microswitch 3, I have intermittent reverse. Sometimes it doesn’t work at all and sometimes there may be up to a 15 second delay before reverse kicks in. I replaced 1/2 speed resistor and get same results. Please help! |
|
|
Similar Threads | ||||
Thread | Forum | |||
Reverse Problem | Electric EZGO | |||
Reverse problem | Gas EZGO | |||
Problem with Reverse | Electric Club Car | |||
Club Car Reverse Problem | Electric Club Car | |||
G1 Gas reverse problem | Gas Yamaha |