|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
02-23-2013, 11:42 AM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2013
Location: North Topsail Beach, N.C.
Posts: 50
|
stretching 1997 ezgo dcs
I'm stretching 1997 ezgo dcs and want to move forward reverse controls to front pod. How do I "strech " the wiring.Also where can I buy parts like rocker panels and flooring for limo.
Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-23-2013, 12:49 PM
|
#2 |
|
Gone Wild
Join Date: Jun 2011
Location: Florida
Posts: 516
|
Re: stretching 1997 ezgo dcs
First, Welcome.
Is your DCS cart a stock controller. or aftermarket like the Alltrax? If it is a stock controller, I would highly recommend replacing it with an aftermarket Alltrax DCX controller. With the Alltrax you can "stretch" your controls by replacing the stockl FNR with a rocker switch style like a PDS uses. Sorry I am no help for the limo parts... But I'm sure you can google it. |
|
|
|
|
02-23-2013, 01:00 PM
|
#3 |
|
Gone Wild
Join Date: Jun 2011
Location: Florida
Posts: 516
|
Re: stretching 1997 ezgo dcs
Looks like an EZGO Shuttle 6 should provide you parts that you would be looking for.
|
|
|
|
|
02-23-2013, 03:57 PM
|
#4 |
|
Not Yet Wild
Join Date: Feb 2013
Location: North Topsail Beach, N.C.
Posts: 50
|
Re: stretching 1997 ezgo dcs
Thanks for the info. It is a stock controller.
|
|
|
|
|
02-24-2013, 09:40 AM
|
#5 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: stretching 1997 ezgo dcs
DCS has a fatal flaw which is that there is no low voltage protection and the controllers burn out under load on low voltage..... an Alltrax control is a better choice.
|
|
|
|
|
02-24-2013, 02:35 PM
|
#6 |
|
Gone Wild
Join Date: Jun 2011
Location: Florida
Posts: 516
|
Re: stretching 1997 ezgo dcs
Not too mention, that Alltrax will also give you a bunch more torque. With a limo that torque is going to help you get going a little quicker and will help on an incline.
|
|
|
|
|
04-14-2013, 06:55 AM
|
#7 |
|
Not Yet Wild
Join Date: Feb 2013
Location: North Topsail Beach, N.C.
Posts: 50
|
Re: stretching 1997 ezgo dcs
I ended up simply using extra wire and butt connectors(one at a time) and that gave me the length to move forward/reverse controls to the new pod seat. Works great!
|
|
|
|
|
04-14-2013, 07:57 AM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,408
|
Re: stretching 1997 ezgo dcs
The DCS F&R is nothing more than 2 micro switches on a rotary cam. Good job.
 |
|
|
|
|
05-05-2013, 08:31 AM
|
#9 |
|
Not Yet Wild
Join Date: Feb 2013
Location: North Topsail Beach, N.C.
Posts: 50
|
Re: stretching 1997 ezgo dcs
These are pictures of the 97 dcs that I picked up for a project. It was a homemade stretch job. I will post the updates I make on the project.
|
|
|
|
|
05-05-2013, 07:34 PM
|
#10 |
|
Gone Wild
Join Date: Jun 2011
Location: Florida
Posts: 516
|
Re: stretching 1997 ezgo dcs
Sweet..
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Stretching a Club Car | Design Center | |||
| Question about stretching an EZ-GO PDS | Electric EZGO | |||
| 1997 EZGO gas 1997 not firing | Gas EZGO | |||
| stretching a 95 ezgo | Design Center | |||
| Stretching? | Design Center | |||
Linear Mode
