|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-16-2015, 08:49 PM | #1 |
Not Yet Wild
Join Date: Apr 2015
Location: Wolcott ct
Posts: 12
|
G1 idler arm clearance
Disassembled a old g1 ,upon rebuild I'm noticing minimal clearance between the threaded ends of the time rods and the bolts holding the a arms in. The space between the two is about 1/8 inch and that does not seem right to me. The front bumper was welded on when I got it so I know it hit something at one time. It looks like a cast piece,so I would think it would have broken not bent but not sure. I can't even find one to purchase, all I find is for a g2. Any input from anybody? Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
idler arm | Gas EZGO | |||
Idler arm removal | Gas EZGO | |||
96 TXT Idler Arm question | Electric EZGO | |||
g1 pitman/idler arm bent?? | Gas Yamaha | |||
94 EZ-Go Idler Arm issues | Gas EZGO |