|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-08-2016, 05:51 PM | #1 |
Not Yet Wild
Join Date: Oct 2015
Posts: 18
|
Governor
Just bought a 2015 g29 and I adjusted the 10mm bolt to what it shows on diy YouTube video. It didn't seem fast enough so I turned it more probably 1/4 inch left and on my gps was getting 15 mph. Cart is going to be used at a campground at the lake. Would you guys recommend leaving it there or tighten it all the way. First golf cart and just now finding things out. Thanks for any replies.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-08-2016, 06:14 PM | #2 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,316
|
Re: Governor
Crank it all the way in. You're not gonna hurt it.
|
02-08-2016, 07:25 PM | #3 |
Gone Wild
Join Date: Jan 2016
Location: Illinois
Posts: 164
|
Re: Governor
I agree, go the distance.
|
02-08-2016, 08:09 PM | #4 |
Not Yet Wild
Join Date: Oct 2015
Posts: 18
|
Re: Governor
Ok I'll tighten her all the way. No problems with oil?? The cart will be driven a couple of miles at a time without stopping. Thanks
|
02-08-2016, 08:52 PM | #5 |
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: Governor
Use a ziptie. A lot easier
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Governor | Gas Club Car | |||
governor Max? | Gas EZGO | |||
governor | Gas EZGO | |||
G1 governor | Gas Yamaha | |||
Governor | Gas Yamaha |