|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-23-2016, 02:45 PM | #1 |
Not Yet Wild
Join Date: Aug 2014
Posts: 4
|
Top for G1 ???
I've had a G1 under construction for quite a while, done a ton of fabricating for it but I'm up against what to do about a top. I've looked at the originals, even if I could find one it really wouldn't look good on this cart it's far from it's beginnings. I've looked at the fold down soft tops, nice but I'd rather fabricate my own but the G1's body lifting like it does has me stumped . So I'm searching for any ideas anyone may have came up with to make this work. I've been over this site many times hoping someone has nailed it but I'm coming up empty handed. Any suggestions / photos that may lead me to a solution would be greatly appreciated
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-23-2016, 08:02 PM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,010
|
Re: Top for G1 ???
Maybe use removable pins at the top on each side of the windshield.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
08-23-2016, 09:37 PM | #3 |
Not Yet Wild
Join Date: Mar 2016
Posts: 65
|
Re: Top for G1 ???
I will add some pics of a G1 with a ezgo top fabbed up to fit. Take out 4 bolts and top comes off leaving windshield in place. The 4 bolts can have wingnuts. Give me a day or two I won't forget ya.
|
08-24-2016, 01:41 PM | #4 |
Not Yet Wild
Join Date: Aug 2014
Posts: 4
|
Re: Top for G1 ???
that would be greatly appreciated, any ideas are good ideas at this point
|
08-30-2016, 03:41 PM | #5 | |
Not Yet Wild
Join Date: Jun 2016
Location: Edmonton Canada
Posts: 8
|
Quote:
Thanks you....I'm interested as well on how to fab this project. Sent from my iPhone using Tapatalk |
|