|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
02-22-2018, 05:04 PM | #1 |
Not Yet Wild
Join Date: Sep 2017
Posts: 20
|
DCX400 "under temperature" code
Cart: 2006 Yamaha G22E 48V
S/N: JU2-309303 My cart has a DCX400 controller and the cart will work and then not work intermittently. Whenever the cart won't move, I get 2 flashing red lights (under -25C temperature code) and then after 10-15 seconds or so it'll turn green and then the cart will move just fine. When in "2 red," the solenoid will activate/"click" but no motion. I live in Arizona (temps have been in the 50s and 60s F) but we did get quite a bit of rain last week. It was working fine (to my knowledge) before the rain and started having problems after the rains past. Sometimes the cart will run fine almost all day (such as yesterday) but today I can't drive it more than 5-10 secs without power cutting out. I've read that sometimes if the frame has voltage that it can mess up the controller. I've only been able to find any voltage on the frame where the two screws attach the controller to the metal plate (33V), but the metal plate has no voltage or the casing of the controller, just the screws themselves. I do have a dying battery in my DMM so I may just be getting funky results. Is my controller toast or do I just need to find a way to insulate/dry out the controller? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-22-2018, 05:18 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: DCX400 "under temperature" code
Call Alltrax tech support on this one. I think the temp fault is a catchall code for just about any circuit board failure. 541 476 3565
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO PDS "welded solenoid" code | Electric EZGO | |||
CC Precedent throwing "main welded" code but cart still runs.... | Electric Club Car | |||
2000 EZGO TXT rebuild - Code name "Vader" | Members Rides | |||
Do I need speed code 4? And whats about front end "Play"? | Lifted Golf Carts | |||
Alltrax SPM "low throttle" error code | Electric EZGO |