|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-25-2018, 10:43 PM | #1 |
Getting Wild
Join Date: Apr 2018
Posts: 93
|
36v vs 48v?
1990 EZgo C1390 Marathon with 6 batteries currently (36v)
I have read that golf carts are either 24v to 36v, or..... 36v to 48v. Is this true with a 1990 ezgo c1390? Is there a way to verify I can't add 2 more batteries? Can I use 4 batteries(24v) or 5 (30v) while I equalize a single 6v or 2 batteries (12v)? I don't have a 36v charger w equalization right now. Please don't tell me to buy one, that's not the question - Thank you for understanding at the moment. A new charger is in the plan, just not right now. Sent from my Lenovo PB2-650Y using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-26-2018, 12:30 AM | #2 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: 36v vs 48v?
You need 36 volts to run a 36 volt cart. From what I have read there were some carts that were made in the 1940s and 1950s that were 24 volt. Short answer there is no "either."
You need 36 volts. Hope this helps. |
05-26-2018, 02:58 PM | #3 | |
Getting Wild
Join Date: Apr 2018
Posts: 93
|
Re: 36v vs 48v?
Quote:
Sent from my Lenovo PB2-650Y using Tapatalk |
|
05-27-2018, 07:47 AM | #4 |
Gone Wild
Join Date: Jul 2010
Location: Peachtree City, Ga.
Posts: 2,759
|
Re: 36v vs 48v?
This is what the Trojan battery company says: http://www.trojanbattery.com/tech-su...y-maintenance/
Scroll down to the part about equalization. You can do it with the charger you have. If you want to really understand batteries, look here: http://batteryuniversity.com/ Enough here to keep you occupied for hours. Can carts be run on voltage other than the nominal voltage they were designed for? Yes but there will be consequences. On solid state carts the main risk is to the controller. Putting 48v to a 36v controller might work for awhile or maybe not. Might quit immediately or maybe run for days or weeks before giving up. Solenoid may be an issue also. It's a crap shoot. Resister carts don't have a controller. They may run for awhile on higher voltage also. The coils won't like it and likely melt so you have to wire it up with a switch so it's really a boost. It's been done here so you can research it if you want. Doing this incorrectly on a resister cart can be dangerous and you could burn it up. |