92 ezgo marathon

[kernal]

There have been many examples of both resister and solid state (original) Marathon carts in the '90-'93 range over the years on this forum.

As I recall the service manual that I had for a '91 had sections for both.

[harley118]

Sorry guys I was at work I’m headed out to the cart in a minute I will send date code and if I can a picture

[harley118]

Date code is HO692

[harley118]

Good news guys I believe I found the problem and it is the new micro switch on the f/r switch! I tried a different switch and got 36 volts thru it to the other micro switch that operates off the peddle and solenoid kicked in and wheels turned! Much Thanks to everyone for the help you guys are great!!!!

[420ma]

Originally Posted by crash test dummy

yes sir .... controller carts were 94 up

My 1993 is a controller cart

Originally Posted by kernal

There have been many examples of both resister and solid state (original) Marathon carts in the '90-'93 range over the years on this forum.

As I recall the service manual that I had for a '91 had sections for both.

ALRIGHT ... i give up !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Originally Posted by EZGO

Curtis (1205) 500 amp, 36-48 volt -48 volt 500A Series Controller, 0-5K For E-Z-GO Marathon (Years 1989-1994)

Originally Posted by EZGO

ITS throttle input. This Curtis controller works on EZGO electric 1994-up series golf carts. Series carts have a lever used to switch from forward and reverse. They also do not have a toggle tow/run switch on the black control box underneath the seat.

[DubK]

I have a 1990 that is a solid state. I believe 1990 was the first year. Sorry I can't help on your issues!

[Linuxcnc69]

I have to agree Goliath, all my reading says from 90-94 there is a chance for a resistor cart but Ezgo had went to solid state. I have a 91 and a 93 that are solid state. my 89 is a resistor cart.