|
03-07-2021, 06:32 PM
|
#1 |
|
Getting Wild
Join Date: Jul 2020
Location: Davisburg, MI
Posts: 98
|
Alltrax max AMP setting for Nissan Leaf modules?
I just upgraded my cart to an Admiral MOT-A1 motor. I have a Nissan Leaf battery bank of 7 modules. 2 gauge battery cables. 500amp Alltrax series controller. I am wondering what to set my max current at in the controller. It is currently limited to 350A. Too conservative?
Searching online I saw a random reference that the motors draw was 88A. Most sellers recommend running this motor with at least a 400A controller. I believe some logging is in order with an eye on battery temperature, but I don't necessarily know what bad is. Suggestions? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-07-2021, 09:11 PM
|
#2 |
|
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,171
|
Re: Alltrax max AMP setting for Nissan Leaf modules?
With 7 modules, I would not go above the 350A you have it set to.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Gen3 leaf modules anyone? | All things Lithium | |||
| Nissan Leaf Modules from Tech Direct | Lithium Club Car | |||
| nissan leaf modules | Golf Carts and Parts | |||
| Correct orientation for Nissan Leaf Modules and plates? | All things Lithium | |||
| Parallel Nissan Leaf Modules | All things Lithium | |||
Linear Mode
