|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-17-2009, 07:49 PM | #1 |
Gone Crazy
Join Date: Nov 2008
Location: Pine Hill NJ
Posts: 560
|
84 Marathon motor mount bolts
The Gasser I'm trying to rebiuld for the Fire Co. seems to have motor mount problem. On the passenger's side 2 out of 4 are broke. Not a problem because when I install the lift I should be able to drill and retap them. The driver's side is where I think I have a major problem. I see 3 bolt holes and only 1 has a bolt in it. The 1 that has a bolt in it is the top one( the one that sits in the cradle or the u groove). The other 2 that are lower are missing. I tryed replacing them with 1" bolts but too short. Tryed 2" bolts but they don't line out with the holes(on a bad angle). Are these longer bolts also Head bolts?? I hope not, I really don't have time to pull the motor: I have to turn a running cart over to the body shop no later then monday. Pleaseme.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-17-2009, 07:52 PM | #2 |
It ain't gonna be easy.
Join Date: Apr 2008
Location: St. George, SC
Posts: 1,480
|
Re: 84 Marathon motor mount bolts
wish I could help you.with that one but I never dealt with that particular area on a cart that old. Can you put up some pics?
|
08-17-2009, 08:00 PM | #3 |
Gone Crazy
Join Date: Nov 2008
Location: Pine Hill NJ
Posts: 560
|
Re: 84 Marathon motor mount bolts
|
08-18-2009, 11:39 AM | #4 |
EZ Like Sunday Morning
Join Date: Jun 2009
Location: Owatonna, Minnesota
Posts: 465
|
Re: 84 Marathon motor mount bolts
Just had my 1987 engine out and all the bolts were 1" long and the are a basterd to get lined up, it took me forever. There is only 3 on the drivers side and 4 on the passenger side.
I have 2 words for those bolts THEY SUCK!! |
08-18-2009, 04:28 PM | #5 |
Gone Crazy
Join Date: Nov 2008
Location: Pine Hill NJ
Posts: 560
|
Re: 84 Marathon motor mount bolts
I agree on the "Suck" part! So all the mount bolts are 1"? I tryed using 1" bolts on the Driver's side and they didn't hit anything but air so I tryed 2" and I found holes in the head but they where definently not in line with the nount holes. I'll try again.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Briggs motor mount pic needed (for 93 ezgo marathon) | Big Block Talk! | |||
Front motor mount | Gas EZGO | |||
Motor Mount | Gas EZGO | |||
Club Car Motor Mount | Gas Club Car | |||
G9 motor mount | Design Center |