|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-16-2011, 05:51 PM | #1 |
Not Yet Wild
Join Date: May 2010
Posts: 8
|
1985ish ez go marathon steel nose
Hello guys, been on here for a while, taking in all the info i can, did a search for body removal, and found nothing for my old azz cart. Does anyone have any info on this? I havent really looked that hard at my cart yet, but, would like some direction if possible. btw its a gasser, if that matters....
thanks, mark |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-17-2011, 09:01 AM | #2 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: 1985ish ez go marathon steel nose
go to the top of this forum, and find the sub forum
'gas tech".. in there find the thread with the gold stars. you will see a link in there to bennetts carts. your parts manual will be in there. marathon bodies up to 88 were all pretty much the same. on the 89-93 models only the cowl was changed and not much. and welcome to BGW. |
10-17-2011, 07:18 PM | #3 |
Getting Wild
Join Date: Jun 2008
Posts: 80
|
Re: 1985ish ez go marathon steel nose
the whole thing has got studs welded on it , it all pretty much unbolts ( 3/8 i think) from the bottom. nose cone everything. EXCEPT, there are some bolts for the steel nose under/behind plastic tray. once you get it unbolted, you have to "stretch" the fenders out to get the studs free, and off it comes. hope this helps.....shag
|
|
|
Similar Threads | ||||
Thread | Forum | |||
88 CC Nose | Gas Club Car | |||
Need a plastic nose for a Marathon after a small collision | Golf Carts and Parts | |||
WTB - Plastice nose from a 1988 to 1993 EZGO Marathon. | Golf Carts and Parts | |||
Looking for a used nose piece | Electric Club Car | |||
WTB Looking for a rubber nose with lights for marathon | Golf Carts and Parts |