I need crank and balancer shaft spacers

rmarcusy · 01-27-2012, 04:57 PM

I'm building a ezgo, robin 352 eng from two broken ones and have everything I need except the crankshaft and ballencer shaft spacers, the ones I have are too thick, and the book says you need to be within.003 to .015 to be right. The one I need for the crankshaft is between .006 to .018, and for the ballencer is between .003 to .015. Any help would be nice. Thank You

rmarcusy · 01-27-2012, 11:14 PM

I've double checked all this site's sponcers, EBay, the local EZGO dealer and no one has these spacers,,, Can anyone give me a clue on a place to get them, or have them, these are small and would fit in a envelope thru the mail.

rmarcusy · 01-29-2012, 04:35 PM

For those of you that are into metric,,, the spacers I need are between
0.1mm to 0.4mm on the crankshaft,
0.2mm to 0.4mm on the ballancer
the smallest that shopezgo has on there website are 0.6

01-27-2012, 04:57 PM	#1
rmarcusy Gone Wild Join Date: May 2011 Location: Oklahoma City Posts: 204	I need crank and balancer shaft spacers I'm building a ezgo, robin 352 eng from two broken ones and have everything I need except the crankshaft and ballencer shaft spacers, the ones I have are too thick, and the book says you need to be within.003 to .015 to be right. The one I need for the crankshaft is between .006 to .018, and for the ballencer is between .003 to .015. Any help would be nice. Thank You

01-27-2012, 11:14 PM	#2
rmarcusy Gone Wild Join Date: May 2011 Location: Oklahoma City Posts: 204	Re: I need crank and balancer shaft spacers I've double checked all this site's sponcers, EBay, the local EZGO dealer and no one has these spacers,,, Can anyone give me a clue on a place to get them, or have them, these are small and would fit in a envelope thru the mail.

01-29-2012, 04:35 PM	#3
rmarcusy Gone Wild Join Date: May 2011 Location: Oklahoma City Posts: 204	Re: I need crank and balancer shaft spacers For those of you that are into metric,,, the spacers I need are between 0.1mm to 0.4mm on the crankshaft, 0.2mm to 0.4mm on the ballancer the smallest that shopezgo has on there website are 0.6

Similar Threads
Thread	Forum
Jakes 2" billet wheel spacers & stud spacers	Golf Carts and Parts
distance between crank and trans shaft 94 gas cc	Gas Club Car
aligment of cam shaft, crank, and crank balance on g14	Gas Yamaha
I need a g9 crank shaft really bad	Golf Carts and Parts
2 stroke crank shaft wanted ezgo	Golf Carts and Parts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum