09-12-2013, 11:27 AM | #1 |
Not Yet Wild
Join Date: Apr 2013
Posts: 64
|
now what
91 2cycle,took the s/g out,cleaned the terminals,made a few new cables,fully charged batt.go to start and all it does is click the solenoid.free spins by hand and when I installed it this time it spun once with the key on and now just clicks.i don't have much hair left but i'm ready to pull it out.help
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-12-2013, 12:46 PM | #2 |
Getting Wild
Join Date: Aug 2013
Posts: 76
|
Re: now what
Did you try running the s/g out side the cart to make sure it's working corectlu
|
09-12-2013, 01:31 PM | #3 |
Not Yet Wild
Join Date: Apr 2013
Posts: 64
|
Re: now what
gonna do that now will let you know
|
09-12-2013, 01:50 PM | #4 |
Not Yet Wild
Join Date: Apr 2013
Posts: 64
|
Re: now what
ok s/g is out but not sure how to test it
|
09-12-2013, 03:40 PM | #5 |
Getting Wild
Join Date: Aug 2013
Posts: 76
|
Re: now what
Use a set of battery cables from a good batt direct to the terminals on the s/g. but make sure to have the s/g braced some how so it don't take off
|
09-12-2013, 04:33 PM | #6 |
Not Yet Wild
Join Date: Apr 2013
Posts: 64
|
Re: now what
ok which terminals +@- to where?
|
09-12-2013, 08:07 PM | #7 |
Gone Wild
Join Date: May 2013
Posts: 320
|
Re: now what
Do you have solid ground from battery to Frame and engine?
|
09-12-2013, 08:42 PM | #8 |
Getting Wild
Join Date: Aug 2013
Posts: 76
|
Re: now what
i belive its the rear is neg and side are poss but not sure with out looking at mine
|
09-13-2013, 08:14 AM | #9 |
Not Yet Wild
Join Date: Apr 2013
Posts: 64
|
Re: now what
ok,so the s/g is out of the cart,checked the grounds and cleaned them up,what I need to know is what terminals do I hook the jumper cables to to bench test the s/g,thanks
|
09-14-2013, 09:24 AM | #10 |
Getting Wild
Join Date: Aug 2013
Posts: 76
|
Re: now what
Just traced the wires on mine the terminals on the rear of the s/g are both positive only hook up one the terminals on the side closest to the rear terminal is the corresponding negative one way runs it for forward the other for reverse so of check both
|