|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
12-15-2013, 06:07 PM
|
#1 |
|
Getting Wild
Join Date: Aug 2013
Location: Houston, TX
Posts: 81
|
Rear end ID and bearing help 81 (?)
The tag indicates I have an 81 Marathon but I had to purchase brakes for an 82. I was told they likely changed the rear end out to a later model. When I installed the brakes I discovered a lot of play in one of the axle bearings so need to replace them. It is a spicer rear end (I will try to post pictures). Couple questions:
-Can I pull the hub off with a 2 jaw puller? -Can I replace the bearings without removing the rear end? -Can I replace the bearings without removing the axle? -No oil leaking from the axle, lot of play and typically would leak. Is the bearing not bathed in oil? -How can I ID the rear end? Any advise would be appreciated, I dont have a manual. Thanks, Kevin |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-19-2013, 01:27 PM
|
#2 |
|
Getting Wild
Join Date: Aug 2013
Location: Houston, TX
Posts: 81
|
Re: Rear end ID and bearing help 81 (?)
According to vintage golf cart parts, they put different rear ends in the later 81 models. In the future I will purchase parts for 1982 vintage carts.
|
|
|
|
|
12-19-2013, 02:06 PM
|
#3 |
|
......................
 Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Rear end ID and bearing help 81 (?)
is this it
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Rear end bearing | Electric EZGO | |||
| Rear bearing | Extreme DC! | |||
| rear axle bearing | Electric EZGO | |||
| Rear Bearing Replacement | Electric EZGO | |||
| Changing rear bearing in 97' EZ GO-HELP!!! | Electric EZGO | |||
Linear Mode
