|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-22-2014, 09:38 AM | #1 |
Not Yet Wild
Join Date: Jan 2014
Posts: 1
|
EZ Go PCX-955 Question
Hello all, I'm wanting to purchase this EZ Go model and don't have very much information about this model, so I was wondering if anyone here knew if we would be able to convert this model from a 36V to a 48V and also add a 4"-6" lift kit to it? Any help is very much appreciated, thanks much!!!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-22-2014, 10:22 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZ Go PCX-955 Question
Welcome to BGW!
I don't know if lift kits are available for it, and in it came with two types of drive systems, resistor and controller. With the controller drive, you can up the pack voltage to 48V (or higher). Of course, the solenoid and controller must be compatible with the pack voltage. |
01-22-2014, 11:29 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: EZ Go PCX-955 Question
I traded one of these industrial carts to a friend who lives on top of a hill. We put a AXE400 and 48v in it along with some CC front cable brakes and a homemade lift kit. It turned out to be a nice ranch utility vehicle with flatbed, roof rack, and rear winch.
I guess it all depends upon how resourceful you are, not much off the shelf stuff available for these carts. |
|
|
Similar Threads | ||||
Thread | Forum | |||
1990 Club car With flat head Rev limiter question and govenor question | Gas Club Car |