1992 Marathon Charger Connector

[JPfromSD]

I just bought a 1992 Marathon and the person I bought it from doesn't seem to know anything really about it. The charger that he gave me I noticed later it said 12 volt 1.5 amps after attempting to charge it all night. He had it plugged into the first battery directly under the drive side and I plugged it into the same one but nothing happens. seems dead. So I bought a NEW 36V EZGO MARATHON 83-94 SB50 36 Volt EZ-GO Golf Cart Battery Charger. now I after looking at it the place where it connects to doesn't plug anywhere near the batteries, the two wires were cut off. So I guess what I am looking for is new wires that connect to the connector which connects (on the other side) to the charger so I can get this thing up and running. Anyone with any insight would be greatly appreciated. I will post pictures if anyone thinks they could help me out.


Thanks,

JP

[simple man]

This should be what you need. You will have to install your own wires. You will need to get long enough wires to go from B+ on the one side to B- on the other side. (the connections on the battery pack) and terminal ends to use on the batteries. Any hardware store will have the wire and ring terminals. Here's a link to the part: http://www.golfcartking.com/EZGO-SB5...%281230%29.htm

[JPfromSD]

IMG_5262.jpg

IMG_5266.jpg

IMG_5267.jpg

IMG_5268.jpgI attached the pictures to clarify my writing. I do appreciate your help but I am clueless as this is my first GC. When you say B- what does that mean, again excuse me for my ignorance...

JP