|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-16-2014, 03:16 PM
|
#1 |
|
Getting Wild
Join Date: Jan 2013
Location: st. john's nl canada
Posts: 139
|
Yamaha G29 CLUTCH QUESTION
I have a 2007 Yamaha drive and I received a primary clutch for free from my supplier, so here is a question, will this clutch on the left in picture fit my Yamaha drive. The new clutch I believe its out of a Yamaha g14 someone set me straight if possible.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-16-2014, 03:29 PM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Yamaha G29 CLUTCH QUESTION
That is the correct clutch, it was implemented in 2012. You really should use the matched rear clutch and belt that is designed to fit with that primary. I dont think the "team" clutch you had is available any longer.
|
|
|
|
|
03-16-2014, 04:05 PM
|
#3 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: Yamaha G29 CLUTCH QUESTION
Cgtech beat me to it. You will need the new style secondary clutch as well to match up with the primary along with the correct belt that is shorter than the original belt. Yamaha didnt have much success and reliablilty with the team clutches is the reason for the update in the middle of 2012.
|
|
|
|
|
03-16-2014, 04:36 PM
|
#4 |
|
Getting Wild
Join Date: Jan 2013
Location: st. john's nl canada
Posts: 139
|
Re: Yamaha G29 CLUTCH QUESTION
Thanks guys, I am not having trouble with the original primary, so I will use it this summer and purchase the matching secondary then for the updated primary and replace both next winter.
|
|
|
|
|
03-16-2014, 04:48 PM
|
#5 |
|
Gone Wild
Join Date: Nov 2012
Location: Southeastern Pa.
Posts: 319
|
Re: Yamaha G29 CLUTCH QUESTION
I have a question. The old and the new clutches appear to be of the same diameter, so why would you need a shorter belt if you switch from the old to the new? The engine position doesn't move right?
|
|
|
|
|
03-16-2014, 06:36 PM
|
#6 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: Yamaha G29 CLUTCH QUESTION
The primary clutches on the new style 2012.5-2014 and the team primary are the same diameter. The secondaries are totally different sizes. My 2013 cart the belt is about 2 or 3 inches shorter than the belt for the 09 model. The 2013 belt you can lay it inside the 09 belt when both are on the table. The new secondaries went back with a helix.
|
|
|
|
|
03-16-2014, 06:48 PM
|
#7 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: Yamaha G29 CLUTCH QUESTION
Good pic of both primaries with the covers off. The newer style looks like what is on atvs and sidexsides with belt driven transmissions.
|
|
|
|
|
03-16-2014, 07:02 PM
|
#8 |
|
Getting Wild
Join Date: Jan 2013
Location: st. john's nl canada
Posts: 139
|
Re: Yamaha G29 CLUTCH QUESTION
You say the new style secondary went back to a helix, so that is the ones with ramp shoes, am I correct. Thanks for the help dbmachine.
|
|
|
|
|
03-16-2014, 07:04 PM
|
#9 |
|
Getting Wild
Join Date: Jan 2013
Location: st. john's nl canada
Posts: 139
|
Re: Yamaha G29 CLUTCH QUESTION
The secondary I have on my drive has 2 rollers in it, that travel up a screw I guess you would call it.
|
|
|
|
|
03-16-2014, 07:05 PM
|
#10 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: Yamaha G29 CLUTCH QUESTION
Here is the fiche of the new secondary.
 |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 1992 Yamaha Clutch Question | Gas Yamaha | |||
| Yamaha G1 clutch/clone question | Clone Engine Swaps | |||
| Yamaha G1 new Engine/clutch question | Clone Engine Swaps | |||
| Yamaha G1 Primary Clutch Question | Gas Yamaha | |||
| Yamaha Driven clutch question | Gas Yamaha | |||
Linear Mode
