|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-08-2014, 10:55 AM | #1 |
Not Yet Wild
Join Date: May 2014
Location: Virginia
Posts: 9
|
G16 carburetor gasket????
Is there a gasket between the carburetor and the engine??? I do not see one on my ride ..... just curious
1996 Yamaha G16 |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-08-2014, 01:16 PM | #2 |
Gone Wild
Join Date: May 2010
Location: Upstate, S.C.
Posts: 208
|
Re: G16 carburetor gasket????
there is on mine (2001).
|
05-08-2014, 04:46 PM | #3 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,313
|
Re: G16 carburetor gasket????
There are 3 gaskets--all the same. Block/Spacer. Spacer/Carb, Carb/Air Box.
|
05-08-2014, 05:13 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G16 carburetor gasket????
Yep, 3x JN6-13567-00.
|
05-09-2014, 06:50 AM | #5 |
Not Yet Wild
Join Date: May 2014
Location: Virginia
Posts: 9
|
Re: G16 carburetor gasket????
Big THANKS!!! I'm missing all 3 gaskets and the block - errrrrrrrr
|
05-09-2014, 08:00 AM | #6 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,313
|
Re: G16 carburetor gasket????
|
05-09-2014, 02:05 PM | #7 |
Gone Wild
Join Date: May 2011
Location: North East Tn.
Posts: 1,029
|
Re: G16 carburetor gasket????
I used to pick my Yamaha gaskets at the local lawn mower shop. If you had the mat. you could make you own.
|
05-09-2014, 02:15 PM | #8 |
Not Yet Wild
Join Date: May 2014
Location: Virginia
Posts: 9
|
Re: G16 carburetor gasket????
I was going to make my own, but I see the plastic spacer is missing - so it's 3 gaskets and a spacer coming by the "Brown Truck" - again thanks Ya'll
|
05-15-2014, 02:53 PM | #9 |
Gone Wild
Join Date: May 2010
Location: Upstate, S.C.
Posts: 208
|
Re: G16 carburetor gasket????
Do they all have spacers ? Mine is a 2001. It would only run with the choke pulled when I bought it. I cleaned the carb and made my gaskets as it did not have any. I sure don't remember there being a spacer on mine. I will have to look again.
|
05-15-2014, 05:42 PM | #10 |
Gone Wild
Join Date: May 2011
Location: North East Tn.
Posts: 1,029
|
Re: G16 carburetor gasket????
My 01 didn't have a spacer either.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Paper Gasket, No Gasket, Permatex? | Gas EZGO | |||
head gasket | Gas EZGO | |||
Gasket help | Gas Harley Davidson | |||
Differential gasket in g9 | Gas Yamaha | |||
g1 exh. gasket | Gas Yamaha |