|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-15-2014, 08:16 PM | #11 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G16 carburetor gasket????
ALL the G16 (1996) and newer motors had the spacer that slides over the studs, in fact the airbox would not even line up with the starter generator bracket (airbox rear mounting location) without the spacer. Spacer is still there on the FI drives, but it has a little different shape to not restrict the spary pattern of the injector.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-16-2014, 08:25 PM | #12 |
Gone Wild
Join Date: May 2011
Location: North East Tn.
Posts: 1,029
|
Re: G16 carburetor gasket????
You are talking about the part that bolts to the carb with 2 holes in it and turns up and goes to the air box. Not just a little 1/4 spacer or so.
|
05-17-2014, 06:09 PM | #13 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G16 carburetor gasket????
No, roughly 1/2 inch thick. Goes between the carb and the cyl. head.
|
05-18-2014, 06:00 AM | #14 |
Not Yet Wild
Join Date: May 2014
Location: Virginia
Posts: 9
|
Re: G16 carburetor gasket????
The spacer may be hard to actually identify. It may be tucked under the shroud a little, making it look like part of the engine. If your air breather box is attached to the carburetor, and You have just a little bit of stud (1/4" +) left after You attach the breather box, and secure with nut - Your good.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Paper Gasket, No Gasket, Permatex? | Gas EZGO | |||
head gasket | Gas EZGO | |||
Gasket help | Gas Harley Davidson | |||
Differential gasket in g9 | Gas Yamaha | |||
g1 exh. gasket | Gas Yamaha |