Club Car Solenoid Issue

[thecabralfamily]

Yes to the newer (1 piece backrest / plastic handles on bottom seat cushion) seat set up

[jakesnake27]

So it's at least a 2000.5.

Green should go to #3 battery positive, for 1/2 speed reverse, or main positive for full speed reverse.

Here's your wiring diagram:

[thecabralfamily]

Yes, it has the newer seat configuration , 1 piece backrest, plastic handles on the bottom cushion

[thecabralfamily]

Thank you for the diagram, someone has made a mess of the wiring , so tomorrow going to print this up and require, thank you

[jakesnake27]

What is this "Jump it" thing you have? I've never heard of it...

[thecabralfamily]

It's a 12v portable jumper cable.

I noticed this diagram is for 48v is it the same for the 36v?

[jakesnake27]

Originally Posted by thecabralfamily

It's a 12v portable jumper cable.

I noticed this diagram is for 48v is it the same for the 36v?

You'll need a full 36v to test the cart.

The diagram is 36v...

[thecabralfamily]

UPDATE!

I have the 6 batteries, and about to wire them up. I have the battery layout, but just one BIG question.

Off the Charger Connection, there is a Red Wire, does this go to the start of the 36V Series on the Passenger side? Does the WHITE wire go to the end of the Series (NEG) on the Driver Side?

If it does, I should have 3 RED wires

Lights (12V RED)
F/R (RED)
Charger (RED)

So just to be sure, does the RED wire from the charger connection go to the start of the 36V Series (Positive) on the PAX side?????

The diagram you posted shows that wire connection to the F/R Switch

Thank You

[jakesnake27]

Yes, white goes to main negative. Do you have a red cable coming off the FR switch? The one from the receptacle should go to FR then another red from FR to main positive.

[scottyb]

Originally Posted by jakesnake27

Yes, white goes to main negative. Do you have a red cable coming off the FR switch? The one from the receptacle should go to FR then another red from FR to main positive.

So essentially the red charge wire is going to the main(+) on the pass. side ... it is just using the F&R terminal as a junction terminal.