|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-25-2009, 12:01 PM | #1 |
Gone Wild
Join Date: Jul 2009
Location: Gonzales, Texas
Posts: 585
|
Weld motor mounts
Would it hurt to just weld motor mounts solid ?????????????????
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-25-2009, 12:04 PM | #2 |
Gone Wild
Join Date: Sep 2009
Posts: 308
|
Re: Weld motor mounts
you probably could but i bought 4 new from ebay for 20 plus shipping. With my new bb i wanted to make it smooth.
|
11-25-2009, 12:44 PM | #3 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,826
|
Re: Weld motor mounts
I usually remove the front motor mounts on my G9's and make one solid mount from a piece of steel. Just drill 4 holes in the plate and use the existing motor mount holes. Will add a tad more torque keeping the engine from moving back. I've done this for the past 2 years without any problems myself.
|
|
|
11-25-2009, 02:54 PM | #4 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Weld motor mounts
i did what sprid did but isolated the engine with rubber pucks to stop vibration, the old mounts and the engine ten. tower on my g9 fell apart, after all the twikking the motor has been through. i can post pics if you like
|
11-25-2009, 03:11 PM | #5 |
Gone Wild
Join Date: Jul 2009
Location: Gonzales, Texas
Posts: 585
|
Re: Weld motor mounts
Pics are mandatory !!!!
|
11-25-2009, 04:45 PM | #6 | |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Weld motor mounts
Quote:
|
|
|
||
11-25-2009, 04:57 PM | #7 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: Weld motor mounts
How about some later model Yami cushins or like CPP's Clubcar cushions for the Bigblock kits? I have to admit, the stock Yami's are pretty soft.
|
11-25-2009, 05:02 PM | #8 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Weld motor mounts
|
11-25-2009, 05:05 PM | #9 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: Weld motor mounts
here are the pics as promised :
(2nd pic is of broken old tower) |
11-25-2009, 05:10 PM | #10 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: Weld motor mounts
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Looking for better motor mounts | Gas EZGO | |||
Motor Mounts | Gas EZGO | |||
Motor mounts | Gas EZGO | |||
Motor mounts | Gas EZGO | |||
bad motor mounts on g16? | Gas Yamaha |