|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-17-2016, 03:55 PM | #1 |
Not Yet Wild
Join Date: May 2015
Posts: 16
|
Front Hub Assembly Replacement - Greasing and Tightness
Replacing both front hub assemblies on my 2009 Precedent electric. I'd like to know what kind and where I need to grease, and how tight (ft lbs) to tighten the center nut. Any advice is appreciated. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-17-2016, 04:43 PM | #2 |
Guest
Posts: n/a
|
Re: Front Hub Assembly Replacement - Greasing and Tightness
no grease needed
|
09-17-2016, 04:46 PM | #3 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Front Hub Assembly Replacement - Greasing and Tightness
They are sealed bearings. No operator lube points. Tighten nut enough to take out play on shaft, do not over tighten and make the hub bind. It should spin freely.
Edit CTD is faster than me. |
09-17-2016, 04:55 PM | #4 |
Guest
Posts: n/a
|
Re: Front Hub Assembly Replacement - Greasing and Tightness
it took me 5 min to find and copy that
i now have the manual saved too |
09-17-2016, 04:57 PM | #5 |
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: Front Hub Assembly Replacement - Greasing and Tightness
You however want to make sure the hub does not rock on the shaft-otherwise you will ruin the spindle down the road.
|
09-17-2016, 05:01 PM | #6 |
Guest
Posts: n/a
|
Re: Front Hub Assembly Replacement - Greasing and Tightness
hub install #4
|
09-19-2016, 09:12 AM | #7 |
Not Yet Wild
Join Date: May 2015
Posts: 16
|
Re: Front Hub Assembly Replacement - Greasing and Tightness
Thanks guys!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Axle Assembly - Bearing Replacement | Electric EZGO | |||
Help! G2 front Wheel Hub assembly | Gas Yamaha | |||
Mcor4 replacement with new pedal assembly | Electric Club Car | |||
1987 Marathon Brake assembly needed or replacement part number | Gas EZGO | |||
Greasing bearings front bearings/ Bearing Buddies? | Gas EZGO |