Need pics of brake pedal spring

[tyhuck]

I disassembled my 96 TXT to refurbish it from the frame up, but it sat for so long that I am finding it hard to remember how things go back on. I didn't take any pictures because I was sure I was going to have it knocked out quickly and would remember how it came apart (yeah right). So, Could someone snap a picture of the brake pedal assembly, specifically how the return spring is installed? Ide really appreciate it.

[sportcoupe]

Parts manual has pictures of everything.

http://bennettgolfcars.ca/upfile/man...4_10_04_54.pdf

[Springlake]

95 Medalist Hope this helps.

[tyhuck]

Originally Posted by sportcoupe

Parts manual has pictures of everything.

http://bennettgolfcars.ca/upfile/man...4_10_04_54.pdf

That's actually gonna help a lot. Thanks!!!

[scottyb]

Installing it is a Bear.

[rib33024]

Originally Posted by tyhuck

That's actually gonna help a lot. Thanks!!!

Originally Posted by scottyb

Installing it is a Bear.

I was going to say the same thing scottyb said, good luck with that spring, that is one pain in the ***, i would say that is about the hardest thing on the cart when you remove it,

[scottyb]

Originally Posted by rib33024

I was going to say the same thing scottyb said, good luck with that spring, that is one pain in the ***, i would say that is about the hardest thing on the cart when you remove it,

I replaced one ..... pretty sure I did it wrong cause it was too *** hard.

[sportcoupe]

I pulled brake pedal to replace bushings and bolt. The spring came off with a bit of force. I'm sure it's going to take force to reinstall it. I will find out today as parts arrived a couple days ago.

[eflyguy]

On a related note, has anyone removed the linkage from the throttle pedal that disengages the brake? I don't like or use that feature.
..a

[sportcoupe]

Originally Posted by eflyguy

On a related note, has anyone removed the linkage from the throttle pedal that disengages the brake? I don't like or use that feature.
..a

I remove that linkage piece on every cart I run more then 6" lift on because it's in the way. It has no effect except applying the gas will not automatically disengage the brake anymore.