|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-20-2014, 09:55 PM | #1 |
Not Yet Wild
Join Date: Sep 2011
Posts: 2
|
Torque -Brake Cluster Backing Plate
Installing replacement brake cluster on 2006 precedent. Does anyone know torque specifications for 4 bolts which hold backing plate to axle - Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-21-2014, 08:09 PM | #2 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 18,001
|
Re: Torque -Brake Cluster Backing Plate
try posting this in the Club Car section......
|
02-22-2014, 06:07 PM | #3 |
So wild it hurts!
Join Date: Nov 2011
Location: Atlanta, Georgia
Posts: 1,412
|
Re: Torque -Brake Cluster Backing Plate
IHHO there probably is not one published. Did you ever find one, JWS?
|
02-22-2014, 08:44 PM | #4 |
Gone Wild
Join Date: Sep 2012
Location: Savannah, GA
Posts: 2,760
|
Re: Torque -Brake Cluster Backing Plate
If manufacture doesn't list a torque for a particular fastener use the following table for general torque specs. Find your size on the left column and the grade on the top row, follow each to center and there is your spec.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
making a gauge cluster | Gas EZGO | |||
brake cable extension plate | Electric EZGO | |||
03 TXT PDS Backing Problems | Electric EZGO | |||
Noise When Backing up | Gas Yamaha | |||
stock guage cluster | Gas Club Car |