|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-22-2014, 11:29 PM | #1 |
Not Yet Wild
Join Date: Feb 2014
Posts: 48
|
Medalist speed controller upgrade?
I have a 1995 medalist with a burnt out controller and motor. I sent the motor to plum quick to do the bandit upgrade. I can replace the controller with a Rebuilt factory unit for $250 from the local cart shop. I was shopping around and found this alltrax 400a npx4844 its for $277. First off, is this the correct replacement? 2nd, Would I have to upgrade anything else? Thanks!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-23-2014, 09:15 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Medalist speed controller upgrade?
That is a good alternative for a stock cart used on a golf course. If your cart has bigger tires or is used off road, if it has a rear seat or cargo box you need to look further and plan on spending a little more.
|
03-02-2014, 09:38 PM | #3 |
Not Yet Wild
Join Date: Feb 2014
Posts: 48
|
Re: Medalist speed controller upgrade?
Is this controller ready to run?
What would be another option? |
|
|
Similar Threads | ||||
Thread | Forum | |||
95 Medalist Speed Controller Problem | Electric EZGO | |||
Trouble Shooting: '94 Medalist Speed Controller | Electric EZGO | |||
Medalist speed upgrade | Electric EZGO | |||
94 Medalist speed/torque upgrade | Electric EZGO | |||
CC motor/controller upgrade but no speed | Electric Club Car |