|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-29-2017, 06:34 PM | #1 |
Not Yet Wild
Join Date: May 2017
Location: The Island
Posts: 42
|
4 prong MOLEX plug from throttle volts?
How many volts should come from the pins of the 4 prong Molex plug coming from the throttle pedal when engaged? I finally was able to commondere a Digital Volt Meter and now need assistance diagnosing why this cart stopped and what it will take to get her going again.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2017, 02:48 PM | #2 | |
Gone Wild
Join Date: Apr 2015
Location: Pennsylvania
Posts: 378
|
Re: 4 prong MOLEX plug from throttle volts?
Quote:
Pin 1 - 0V pedal up / Battery Volts Pedal switch engaged Pin 2 - Battery Volts Pin 3 - about 1v~2.6v with increasing thrttle Pin 4 - about 10~14v |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2 prong vs. 4 prong ignition switch | Electric EZGO | |||
3 prong vs 2 prong 48v chargers | Electric Yamaha | |||
EZGO molex switch | Electric EZGO | |||
Powerwise charger w/ Club Car round three prong charger plug HOT!! | Electric EZGO | |||
HELP - 36v to 48v Solid State Conversion...2 prong to 3 prong receptacle | Electric Club Car |