|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
11-01-2017, 06:27 PM | #1 |
Gone Wild
Join Date: May 2015
Location: Houston
Posts: 903
|
Light Kit Switch Question.....
So I want to put my light kit main switch on an after market switch.
I am assuming the stock light switch that came with the kit is a 12V loaded switch because both wires to the switch that comes with the kit are yellow. So I would conclude that this is an inline loaded switch which just allows the 12v current to continue onwards to the lights themselves once the stock light switch is pulled out. Would I be correct in assuming this? 2014 Club Car Precedent Deluxe light kit. I can post pics if needed. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-01-2017, 06:32 PM | #2 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: Light Kit Switch Question.....
Yes. Just wire the other switch the same way.
|
12-12-2017, 12:22 PM | #3 |
Guest
Posts: n/a
|
Re: Light Kit Switch Question.....
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Dumb question, MPT1000, cant find light switch | Electric EZGO | |||
Question on replacing light switch | Electric EZGO | |||
Replace light switch with 3-position key switch | Electric EZGO | |||
Brake light switch question | Electric EZGO | |||
2009 Brake Light Switch Question | Electric EZGO |