|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-10-2018, 01:12 PM | #1 |
Getting Wild
Join Date: Jul 2011
Posts: 138
|
Re 12 volt plug installation
have an ezgo terrain 2500, 48 volt with a DC converter. question do I run a negative wire to main negative and positive wire to the fuse block?
thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-11-2018, 06:38 PM | #2 |
Not Yet Wild
Join Date: Jun 2018
Posts: 33
|
Re: Re 12 volt plug installation
I'm not familiar with your cart.
If you are asking about installing a 48v to 12v reducer... Yes it would be wise to have a fuse between the reducer and your battery pack. Is the fuse block 48v? Is it rated for the amperage of your reducer? If yes then sure that'd be a great place to fuse it. You probably want to fuse the 12v side as well. |
|
|
Similar Threads | ||||
Thread | Forum | |||
12 volt accessory plug install | Electric EZGO | |||
48 volt Dpi charger with ezgo plug **new** | Golf Carts and Parts | |||
2013 Drive 12v Accessory Plug Installation | Gas Yamaha | |||
48 volt inverter installation | Electric EZGO | |||
plug for 36 volt ezgo | Golf Carts and Parts |