|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-15-2019, 04:15 PM | #1 |
Not Yet Wild
Join Date: Mar 2019
Posts: 1
|
1987 EZGO wirng diagram
Hey everyone, I am new to the golf cart world and I need some help. I picked up a 1987 EZ GO Textron the other day and it was all torn apart. It was an old gofl cart at work that they were getting rid of so they let me have itI got most of it back together but on the "wiper board" there are 4 contactors that go to the coils but there is one red wire at the bottom( I would assume is a positive wire) that I cant figure out where it goes. It runs from the Forward, Neutral, reverse switch to a solenoid and then to a switch at the bottom of the "wiper board" and then on the other side of the wiper board is a red wire that I have no clue where it goes. Every diagram I look at only has the 4 wires that go to the coils. Could anyone help me on as to where this wire would go? Thanks in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-16-2019, 03:05 PM | #2 |
Gone Wild
Join Date: Sep 2010
Location: Steger Ill.
Posts: 312
|
Re: 1987 EZGO wirng diagram
We must be working on the same thing I just burned up couple of test leads on the one I'm working on I don't have that wire you have and can't get this thing going. can't locate a print on mine 1988 Marathon????? Was missing a lot of wires, Batteries, tested motor runs, new solenoid, 2 micro switches???? Good luck on it.
|
03-16-2019, 04:08 PM | #3 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: 1987 EZGO wirng diagram
Do you have face book? If so you can checkout my cart page and I have the pictures of what you need with instructions and where the wires and cables go for the Ezgo resistor carts.
Nothing hooks to the first stud on the swiper board it's for the swiper to rest on when your foot isn't on the gas pedal. Click on the link and then click on the pictures to read about each one. https://www.facebook.com/11238044883...type=3&theater |
03-16-2019, 05:19 PM | #4 | |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 1987 EZGO wirng diagram
Quote:
Oops, highliting and making text red and bold doesn't work on your post. |
|
03-16-2019, 06:52 PM | #5 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: 1987 EZGO wirng diagram
Apparently you haven't ever worked on one so here is your answer. The post is for the swipper if it wasn't there it would never move. The swiper is spring loaded so if the first stud isn't in place it just would hit the side of the first stud and maybe go maybe not. It has to have the first to rest on to keep the spring load on it.
|
03-16-2019, 06:59 PM | #6 | |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 1987 EZGO wirng diagram
Quote:
|
|
03-16-2019, 08:05 PM | #7 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: 1987 EZGO wirng diagram
|
03-16-2019, 10:00 PM | #8 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 1987 EZGO wirng diagram
Yeah, I've never seen one before, not up close and personal anyway. I guess I imagined it would be like a FNR; with the studs recessed.
My 1970 Duster had a nylon gear on the end of the distributor. It was sacrificial, to prevent stripping the camshaft. It may not have been nylon, but that's what they called it when mine stripped out in high school, back in the 70s. As to studs? Dunno. I got a boxa nylon bolts and nuts, up to 1/2". Just thinkin' out loud about how far most manufacturers go to save a buck. A lotta newer cars don't even have a key hole on the passenger door anymore. |
03-16-2019, 11:44 PM | #9 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 1987 EZGO wirng diagram
My rasing came from when copper was king! The biggest copper mine in the world at the time put dinner on my little plate (back in the day, the mine is closed down now).
|
03-17-2019, 07:17 AM | #10 |
Gone Wild
Join Date: Nov 2011
Location: S.E. Mi.
Posts: 531
|
Re: 1987 EZGO wirng diagram
Maybe one of these wiring diagrams would help?
http://www.buggiesgonewild.com/elect...g-manuals.html |
|
|
Similar Threads | ||||
Thread | Forum | |||
1987 Club Car Wiring Diagram | Electric Club Car | |||
Need Wiring Diagram for my 1987 GX440 Gas EZ Go Marathon | Gas EZGO | |||
1987 Electric EZGO wiring diagram for Dummies | Electric EZGO | |||
Wiring Diagram for a 1987 EZgo gas cart | Gas EZGO | |||
wire diagram for a club car 36v 1987 | Electric Club Car |