|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-08-2022, 07:54 AM | #11 |
Not Yet Wild
Join Date: Nov 2020
Location: Wisconsin
Posts: 3
|
Re: 2008 Yamaha Drive G29 deceleration/coasting noise
I am in the same boat. Exact same symptoms. I replaced the grommet last fall and the noise went away...for about 30 seconds, and then came right back. I have another grommet, and will likely give it another shot...maybe I did something wrong last time.
It's been a few years since you guys posted last on this. Anybody come up with a good fix? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-08-2022, 08:53 AM | #12 | |
Gone Wild
Join Date: Nov 2013
Location: Western NY
Posts: 643
|
Re: 2008 Yamaha Drive G29 deceleration/coasting noise
Quote:
The problem is the fit between the coupler and the input shaft. The only real fix is the armature/new motor/input shaft. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2009 G29 Deceleration Noise | Electric Yamaha | |||
01 Club car rear end noise on deceleration | Electric Club Car | |||
2007 Yamaha Drive deceleration noise | Electric Yamaha | |||
Grinding noise only when coasting? | Gas Club Car | |||
G1 Deceleration Marble Rattling Noise - Ideas? | Gas Yamaha |