|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
07-07-2020, 09:25 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2020
Posts: 2
|
NEED HELP think I may have Crossed motor wires
I installed a new motor on my 2000 Club Car DS. I didn’t label the wires when I took them off. I know I have S2 & A2 correct and thought I had S1 & A1 correct but did question if the S1 & A1 were. But after research all diagrams showed from my alltrax npx4844 cable goes to A1. Did a test on the jack. Ran in FWD and REV, did great. Put on charger, now won’t run. Please HELP! Also could I have fried the new motor?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-08-2020, 01:19 PM
|
#2 |
|
Not Yet Wild
Join Date: Jul 2020
Posts: 2
|
Re: NEED HELP think I may have Crossed motor wires
Found problem. Studs on the motor were not tight. Has nut at motor then nut that holds the lugs on. Lugs were tight but not nut at motor
|
|
|
|
|
07-08-2020, 03:20 PM
|
#3 | |
|
Gone Insane
 Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,214
|
Re: NEED HELP think I may have Crossed motor wires
Quote:
|
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Crossed wires while changing batteries | Electric Club Car | |||
| symptoms of crossed cables at motor? | Electric Club Car | |||
| wires on motor getting hot | Electric EZGO | |||
| crossed wires | Electric EZGO | |||
| Crossed Wires - Precedent 2007 | Electric Club Car | |||
Linear Mode
