|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-26-2020, 02:11 PM | #1 |
Not Yet Wild
Join Date: Dec 2020
Posts: 19
|
motor coupler
Hi again.......hope everyones christmas was enjoyable and safe.....question I have today is, I am putting my motor back on and where the coupler connects to drive train I rubbed a bit of Phil waterless grease (use on my bicycles) on the coupler, is that ok I read to use a anti seize compound which I didn't have
, for the who have read my treads recently about cart goes into lake I have drain rear end and no notice of water and also in motor no evidence of water but rust on parts of water which I cleaned and replaced bearing in motor just to be safe George |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-26-2020, 07:22 PM | #2 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 17,998
|
Re: motor coupler
that will be fine.....the IMPORTANT thing is to have something there so the two won't "grow together" so that in the future if you need/want to take it apart, you can.
|
12-26-2020, 08:12 PM | #3 |
Not Yet Wild
Join Date: Dec 2020
Posts: 19
|
Re: motor coupler
thank you
|
|
|
Similar Threads | ||||
Thread | Forum | |||
E-Z-GO Electric 19-Spline Motor Coupler | Bike & ATV Engine Swaps | |||
motor coupler par car | Columbia ParCar | |||
18 spline to keyway coupler? (aka the clutchess coupler) | Extreme DC! | |||
How do you remove the coupler on a 36v motor? | Electric EZGO | |||
electric motor coupler | Electric EZGO |