|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-11-2021, 03:47 PM | #1 |
Not Yet Wild
Join Date: Dec 2020
Location: Ohio
Posts: 31
|
ALLTRAX SR controller question
Just today got a new SR ALLTRAX controller connected to my cart. The cart uses 36 volts and has a series motor with a SW202 reversing contactor. The cart runs at half speed in forward and full speed in reverse. I believe I saw somewhere to reverse S1 & S2 but wanted to verify before attempting change.
Also this is the 600 amp controller equipped with cooling fan. So when is the cooling fan supposed to be energized cause I don’t see it spinning up Thanks for your help! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-11-2021, 05:02 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: ALLTRAX SR controller question
Swapping S1 and S2 ought to do the trick.
Fan doesn't run all the time. Comes on when controller temp climbs above a certain temperature, but don't remember what it is. Also comes on when max amp throughput occurs. If you look on the Toolkit monitor screen, there is a fan status box. When it says the fan is being called for, it ought to be running, otherwise not. Also, there is a fan test in toolkit. |
04-11-2021, 06:20 PM | #3 |
Not Yet Wild
Join Date: Dec 2020
Location: Ohio
Posts: 31
|
Re: ALLTRAX SR controller question
JohnnieB thank you sir I was hoping for a quick response so I might give it a test run. Awesome!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Question about DS Alltrax controller | Electric Club Car | |||
Alltrax controller question | Electric EZGO | |||
Alltrax controller question | Electric EZGO | |||
Alltrax Controller Pro Question | Electric EZGO | |||
question about alltrax controller | Electric EZGO |