|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-06-2021, 04:20 PM | #1 |
Not Yet Wild
Join Date: Apr 2021
Posts: 2
|
JB Weld to glue ring guide
Would JB Weld work if I used it to glue the ring guide in?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-06-2021, 06:47 PM | #2 |
Gone Wild
Join Date: Dec 2016
Location: Kingsland, Georgia
Posts: 1,825
|
Re: JB Weld to glue ring guide
Are you referring to the guide ring that goes on the splined motor shaft? If so, no glue is necessary.
Just slide it on, put a little high temp anti-sieze (by Never Sieze) on the shaft and slide the motor on. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Guide ring adhesive | Electric Club Car | |||
Looking for Guide Ring | Golf Carts and Parts | |||
Guide ring or bearing? | Electric Club Car | |||
96 CC 48v Motor guide ring??? | Electric Club Car | |||
After Guide Ring replacement what else? | Electric Club Car |