|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-29-2021, 08:00 AM | #1 |
Not Yet Wild
Join Date: May 2010
Posts: 23
|
Club Car Motor/Controller on G29
Is it possible to swap the motor, controller and solenoid from a Club Car Precedent into a Yamaha YDRE Drive? Both are 48 volt carts.
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-29-2021, 08:36 AM | #2 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,183
|
Re: Club Car Motor/Controller on G29
If you are willing to figure out how to mod the wiring harness going to the controller it might work. Not sure what CC uses for the throttle sensor though. Might have to mod that too. The connector going to the controller is completely different for sure.
|
05-29-2021, 08:50 AM | #3 | |
Not Yet Wild
Join Date: May 2010
Posts: 23
|
Re: Club Car Motor/Controller on G29
Quote:
I did not think through the wiring, thanks for bringing that up. Sent from my iPhone using Tapatalk |
|
05-29-2021, 09:40 AM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,176
|
Re: Club Car Motor/Controller on G29
Controller side is definitely a wiring issue and motor I think uses a different coupler. 10 vs 19 splines
|
05-29-2021, 12:30 PM | #5 |
Not Yet Wild
Join Date: May 2010
Posts: 23
|
Re: Club Car Motor/Controller on G29
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Club car motor and controller | Electric Club Car | |||
Club car Motor and amp controller upgrade | Electric Club Car | |||
Looking for 02 IQ club car motor &controller | Golf Carts and Parts | |||
Club car ds iq motor and controller | Golf Carts and Parts | |||
Club Car IQ Motor and Controller | Golf Carts and Parts |