Pds help

busman9 · 07-10-2021, 02:23 PM

I have an older ladies PDS cart that has been sitting for several years. Replaced the battery pack and check cables. The cart has a XCT 400 controller. Powered the cart up and the controller went through the flashes and then stayed green. Drove around the yard about 100 yds and the 50A fuse blew? What do I need to check THANKS

kgsc · 07-10-2021, 02:39 PM

50 amp fuse is for the charger wire coming from the receptacle. The heavy positive wire needs to go directly to the battery post unless you have a 250 amp as well. Also the white wire going to the receptacle feeds the power to the reed switch coming back for the activation circuit..

busman9 · 07-10-2021, 02:50 PM

OK This cart has a fuse between battery + and the cable going to the solenoid,and positive charging wire. The old fuse was corroded in half so I could not see the size. Should it be a 250A fuse?

busman9 · 07-10-2021, 02:56 PM

I guess the correct ??? is since it is a 400A controller what size fuse do I need?

kgsc · 07-10-2021, 03:01 PM

One on the right is a charger fuse and goes between the battery + and the white wire. One on the left connects to the battery post and the other side to the solenoid.

busman9 · 07-10-2021, 03:07 PM

Thanks,My bad I should have known better. Will order a 250A fuse

kgsc · 07-10-2021, 03:09 PM

If you have a car stereo shop near you they might have it.

07-10-2021, 02:23 PM	#1
busman9 Gone Wild Join Date: Jan 2011 Location: mascoutah,il Posts: 387	Pds help I have an older ladies PDS cart that has been sitting for several years. Replaced the battery pack and check cables. The cart has a XCT 400 controller. Powered the cart up and the controller went through the flashes and then stayed green. Drove around the yard about 100 yds and the 50A fuse blew? What do I need to check THANKS

07-10-2021, 02:39 PM	#2
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,188	Re: Pds help 50 amp fuse is for the charger wire coming from the receptacle. The heavy positive wire needs to go directly to the battery post unless you have a 250 amp as well. Also the white wire going to the receptacle feeds the power to the reed switch coming back for the activation circuit..

07-10-2021, 02:50 PM	#3
busman9 Gone Wild Join Date: Jan 2011 Location: mascoutah,il Posts: 387	Re: Pds help OK This cart has a fuse between battery + and the cable going to the solenoid,and positive charging wire. The old fuse was corroded in half so I could not see the size. Should it be a 250A fuse?

07-10-2021, 02:56 PM	#4
busman9 Gone Wild Join Date: Jan 2011 Location: mascoutah,il Posts: 387	Re: Pds help I guess the correct ??? is since it is a 400A controller what size fuse do I need?

07-10-2021, 03:07 PM	#6
busman9 Gone Wild Join Date: Jan 2011 Location: mascoutah,il Posts: 387	Re: Pds help Thanks,My bad I should have known better. Will order a 250A fuse

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-10-2021, 03:09 PM	#7
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,188	Re: Pds help If you have a car stereo shop near you they might have it.