|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-09-2021, 06:03 PM | #1 |
Not Yet Wild
Join Date: Aug 2021
Posts: 6
|
anyone use a SW182 from CU
I am upgrading a 99 TXT 36v reversing contactor from the stock F&R switch to a DC 182- 36 and had a question about the cable connections on the contactor.
https://nebula.wsimg.com/2118b5db35a...&alloworigin=1 Here is what I have determined is the correct connections. 1) The dropped lug gets wire 4 to A1 on the motor 2) The center lug has "+" stamped in the plastic contactor casing-Wire #3 from B+ on controller 3&4) The two lugs aligned are for wires 5 and 8 that feed S1 and S2 on the motor Is my assumption correct?- Can someone with experience guide an old man along? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-09-2021, 07:35 PM | #2 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Re: anyone use a SW182 from CU
Sounds correct to me.
Sent from my SM-G991U using Tapatalk |
09-09-2021, 07:37 PM | #3 |
Not Yet Wild
Join Date: Aug 2021
Posts: 6
|
Re: anyone use a SW182 from CU
thank you, I just dont want to fry the contactor with my ignorance
|
|
|
Similar Threads | ||||
Thread | Forum | |||
SW182 Magnetic Blowout Info | Electric EZGO |