Run/tow switch

BamaWillis · 05-05-2022, 02:33 PM

While swapping out solenoid I broke wire on toggle switch. Can I replace with one of same amps and volts or do I have to order oem?

scottyb · 05-05-2022, 04:42 PM

Quote:

Originally Posted by BamaWillis

While swapping out solenoid I broke wire on toggle switch. Can I replace with one of same amps and volts or do I have to order oem?

You can use a 15 amp switch, trouble is the OEM switch has 4 terminals and most toggles have 2.

binder49 · 05-05-2022, 05:40 PM

What you need is a single throw double pole switch. you can get ne from almost any hardware store or electronics store.

05-05-2022, 02:33 PM	#1
BamaWillis Not Yet Wild Join Date: Jul 2020 Posts: 11	Run/tow switch While swapping out solenoid I broke wire on toggle switch. Can I replace with one of same amps and volts or do I have to order oem?
BamaWillis Not Yet Wild Join Date: Jul 2020 Posts: 11

05-05-2022, 05:40 PM	#3
binder49 Gone Wild Join Date: Jul 2009 Posts: 158	Re: Run/tow switch What you need is a single throw double pole switch. you can get ne from almost any hardware store or electronics store.
binder49 Gone Wild Join Date: Jul 2009 Posts: 158

Similar Threads
Thread	Forum
2019 TXT turn signal switch and brake light switch?	Electric EZGO
Changing keyed Forward/reverse switch to rocker switch	Electric EZGO
99 club car 48 volt has rocker switch with diag plug hole in bottom of switch	Electric Club Car
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP!	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum